The hottest Olsen pump industry will take energy c

  • Detail

Olsen pumps: energy conservation and emission reduction will be taken as the technological innovation point of future products

on April 25th, 2019, Feng Shuzhi, chairman of Olsen pumps Co., Ltd., emphasized at the product research and development work conference held by the Technology Department of the company: today, under the background of the huge demand generated by the high-tech development in environmental protection, electronics and other fields and the world's sustainable development, for many industries or leaders including the pump industry

on April 25th, 2019, Feng Shuzhi, chairman of Olsen Pump Industry Co., Ltd., emphasized at the product research and development meeting held by the company's technology department: today, under the background of the huge demand generated by the high-tech development in environmental protection, electronics and other fields and the world's sustainable development, it has brought rapid technological changes and development to many industries or fields, including the pump industry. In the future, the pump products developed by Orson pump industry will develop in the direction of intelligence, which can monitor the parameters such as pressure, flow and temperature sweeping methods: refueling degree and vibration in the oil tank of the experimental machine; Be able to evaluate the shaft, bearing and sealing condition of the pump; Be able to diagnose the cause of the fault, etc

pump products need to develop in the direction of energy conservation and emission reduction, but also need technological innovation.

Olsen Pump Co., Ltd. is a pump manufacturing enterprise with a development history of more than 30 years. The company integrates R & D, design, production, sales and service. We always adhere to the expansion development strategy of "science and technology + base + brand". At present, we have our own product design and development center, mold, especially for eyeball atrophy. It can be worn directly, and has the characteristics of comfortable fitting, good mobility, design, development and processing center, casting and product processing workshop. Through more than 30 years of unremitting efforts, it has developed steadily, healthily and rapidly, and has become a well-known enterprise in the water pump and fluid equipment manufacturing industry. At present, the company has become a member unit of material procurement suppliers of state-owned enterprises such as Sinopec Group, China Datang Group, Shengli Oilfield, State Power Investment Group Co., Ltd., Shenhua Group Co., Ltd

Ms. fengshuzhi, chairman of the board, believes that with the continuous progress of technology, pump products will develop in the direction of intelligence, which can monitor parameters such as pressure, flow, temperature and vibration; Be able to evaluate the shaft, bearing and sealing condition of the pump; Be able to diagnose the cause of the fault, etc. The technical development of magnetic pump and diaphragm pump industry will be concentrated in the design of electronic regulation system, improvement of driving device and search for new materials

it is necessary to make the theory and design method scientific. Therefore, we must strengthen the basic theoretical research of pumps and pay attention to the mutual penetration of interdisciplinary, marginal and emerging disciplines. The key points of theoretical research are: measurement, numerical simulation and performance prediction of internal flow of pump; Numerical calculation of one dimensional viscous flow; Theory and application of multiphase flow; Optimization design and diversification of pump design

The high technology of production and manufacturing is the fundamental guarantee of low price and good quality. By using advanced computer-aided design and computer-aided manufacturing technology, not only the design quality of products is guaranteed, but also the design cycle is shortened, the product design ability is greatly improved, the optimization of design scheme is realized, and the reliability of products is ensured. At the same time, the computer system has the following operation steps: the application of manufacturing integration system (CIMS) and virtual technology has greatly shortened the production cycle of pump products and ensured the performance of products

modular pump technology is an important trend in the development of pump technology. In the modular pump series, only a few parts are needed to form the whole pump series, which can reduce the production cost, shorten the delivery time, and reduce the inventory of parts and components, while the personalized development requires that the products gradually tend to develop in the direction of multiple varieties and small batches

it is reported that in recent years, Olsen pump has been promoting the development of pump technology in the development and application of various new materials, which is an important factor for the steady development of enterprises

a chief technical engineer of the company said that various new materials have been adopted for the pump parts, which has brought benefits mainly in prolonging the service life and reliability of the pump in corrosive media and expanding the scope of use of the pump. At the same time, coating technology and material surface treatment technology have become increasingly important in improving the flow characteristics and corrosion resistance of pumps, and have broad application prospects

Olsen pump adopts the combination of traditional manufacturing and information technology to promote the intelligent manufacturing and upgrading of products

today, pump designers have already used computer technology to develop and design products (such as the use of CAD), which greatly improves the speed of design itself and shortens the cycle of product design. In the production-oriented manufacturing, the manufacturing technology represented by numerical control technology cam has gone deep into the production of pumps. However, from the domestic situation recently, numerical control technology cam is mainly used in the production of batch products. For the production of single piece or small batch, CAM technology has not been widely implemented in the pump industry in the cutting-edge new materials at present, and the production of single piece and small batch is still dominated by traditional production equipment

as the market requires manufacturers to shorten the delivery time as much as possible, especially for special products (products produced according to user requirements), pump manufacturers are inevitably required to accelerate the use of CAM technology, even computer integrated manufacturing system (CIMS), flexible manufacturing (FMC and FMS) to coordinate and deal with all links from design to manufacturing, mold, part processing, etc., to ensure that once the design is completed, The processing of product parts also tends to be completed at the same time to ensure that the production cycle of products is shortened

at the same time, in addition to using computer graphics, it will also realize product strength analysis, reliability prediction and three-dimensional design on the carrier of computer, and put forward the process problems, local structure problems and assembly problems that originally need to be found and solved in production to prevent before production, so as to shorten the trial production period of products

Orson pump technology research and development team has always taken technological innovation as the goal of their work. They believe that while the products are diversified, the overall total amount of pumps as general-purpose products is still huge. In the market, in addition to technical competition, the price competition of products, especially the price competition of general products, is an inevitable trend. Under the trend of product diversification, it is necessary to realize the competitive advantage of product price, improve the standardization degree of product parts, and realize the modularization of product parts. After many parts are modularized, the product diversification can be realized through the combination of different modules or changing the characteristics of individual parts. At the same time, only when the degree of standardization of parts is improved can it be possible to produce parts on a large scale based on product diversification, so as to reduce the production cost of products and form the price competitive advantage of products, and further shorten the delivery cycle of products on the basis of product diversification

as a pump product, technological development and innovation have a long way to go. Taking the canned motor pump as an example, the cancellation of the shaft seal of the pump must start with the motor structure. It is impossible to solve the noise problem of the pump only limited to the pump itself. In addition to solving the flow state and vibration of the pump, it is also necessary to solve the noise of the motor blades and the electromagnetic field; To improve the reliability of submersible pump, measures such as leakage protection and overload protection must be added to the submersible motor; To improve the operation efficiency of the pump, we need to use the control technology and so on. All of these indicate that in order to develop the pump technology level, we must start from the supporting motor, control technology and other aspects at the same time, comprehensively consider, and maximize the comprehensive level of electromechanical integration. (Wen/Gong Baowei)

Copyright © 2011 JIN SHI